Application and precautions of concrete placing boom

What is a concrete placing machine? For those who have not come into contact with it, a placing machine is a relatively important mechanical equipment on a construction site, mainly composed of steel bars, hydraulics, storage equipment, safety devices, etc. Therefore, during the construction process, you must pay attention to the position of the piles. This importance determines whether the reinforcement will proceed. Therefore, you must pay attention to the precautions for the use of the placing machine.

First, the spacing of the reinforcement racks shall not exceed 70 cm.

Second, when laying the ground steel mesh, you must use overtime to support the steel beams.

Third, when reinforcing the top of the placing machine, you must use wind ropes to prevent displacement.

Fourth, arrange a supervisor to monitor and supervise safety.

Site map of the reinforcement of the placing machine

Specific treatment methods for the concrete placing machine when doing reinforcement

First, the reinforcement of the placing machine must be placed directly above the formwork pole, and cannot be placed directly on the steel bars or formwork. Each support needs to be made of wooden pads.

Second, each support needs to be made of steel bars.

Third, the spacing of the template of the placing machine is at most 20 cm.

Fourth, a scissors brace must be set up in the area where the concrete placing machine is placed to form an enhanced formwork support structure.