Description:
18m JUHE insulated bucket truck, maximum operating height 18m; turntable can achieve ±360° rotation. The main features of this model are:
1. High voltage resistance, excellent insulation performance; upper and lower arms are insulated at two levels, and the lower arm insulation section can reliably provide double-layer insulation protection for ground personnel.
2. 2-section telescopic arm, wider operating range, suitable for live operations of various distribution network lines, and can enter the bucket from the ground.
3. The working bucket swings ±90°, and can automatically adjust the moving speed when moving at any amplitude position, and is equipped with a vertical lifting function, which is flexible and accurate in operation, and smooth and comfortable in operation.
4. Outrigger ground protection device to prevent tipping;
5. The interlocking device for getting on and off the vehicle, when the working bucket and arm are not retracted in place, the outrigger operation cannot be performed, ensuring the safety and reliability of the vehicle during operation, and also ensuring driving safety.
6. Hydraulic safety device, equipped with various balance valves, hydraulic locks, etc., can ensure the safety of operation even in the event of a ruptured oil pipe.
7. Equipped with emergency safety devices such as engine start-up and shutdown, emergency stop, and electric emergency power source, which can effectively deal with sudden failures.
8. Remote throttle acceleration function, automatically switching high and low throttle according to different actions, effectively reducing fuel consumption.
9. Hydraulic mechanical handle operation, the system is stable and reliable;
10. Insulated small boom device, convenient for lifting tools and equipment, and improves work efficiency;
specification:
| Main technical parameters of aerial work vehicle | ||||
| category | project | unit | data | |
| Appearance parameters | Length x width x height | mm | 81 25*2 530 *3 7 0 0mm | |
| Total mass | kg | 120 00 kg | ||
| Main performance parameters | Rated load of working platform | kg | 280 kg | |
| Maximum operating height/bottom height | m | 18 m /16.213 m | ||
| Maximum operating range | m | 12 m | ||
| Working range at maximum working height of working bucket | m | 3.2 m | ||
| Working height when the working bucket has the maximum working range | m | 10.4m | ||
| Outrigger span | Horizontal | mm | 4 290 mm | |
| Vertical | mm | 4 420 mm | ||
| Working bucket rotation angle | º | ±90 ° | ||
| Turntable rotation angle | º | 360 º | ||
| Working bucket lifting | m | Vertical lift: 0.6 m | ||
| Insulated small crane lifting capacity | kg | 4 50 kg | ||
| Applicable voltage level | KV | 0~ 46 kV | ||
| upper insulation arm | m | 4.8 m | ||
| Effective length of lower insulation arm | m | 0.8 m | ||
| Wheelbase | mm | 4500 | ||
| Maximum driving speed | km/h | 10 5 | ||
| Approach Angle | ° | 15 | ||
| Departure angle | ° | 11 | ||
| Work Platform | Double bucket (length × width × height) | m | 1.19×0.6×1.06 | |
| Boom type | Hybrid arm (folding + telescopic) | Mixing arm | ||
Photos:
inquiry: WE WILL CONTACT YOU WITHIN 24 HOURS
