Description:
JUHE concrete pump trucks are competitive products designed by JUHE MACHINERY has high reliability, high efficiency, high security, and high durability at an organic whole, with reasonable matching on the chassis, power, electrical, hydraulic, and pumping system. Jib structures are flexible, and the trucks move easily, safely, and stably.
Advantages:
Intelligence
Full hydraulic control technology
Fast fault location, saving time more than 50% in fault detection.
Electric control system
Intelligent electric control system, simple structure, reducing electric faults.
Safety
Hydraulic oil level Auto-detection and radiating technology
Auto-detect hydraulic oil and temperature, protecting the hydraulic system.
Intelligent safety technology
All weld lines by 100% nondestructive flaw detection.
High efficiency
Full hydraulic commutation technology
The commutation time is 10% lower, and the pumping efficiency is 20% higher.
Advanced Jib structure technology
Flexible and efficient placing, no blind angle.
specification:
| I. Chassis | ||
| 1 | Chassis Brand | ISUZU/SINOTRUK/FAW |
| 2 | Engine Power | 400-460HP |
| II. Boom system | ||
| 1 | Max. Vertical height(M) | 48 |
| 2 | Max. Horizontal Concrete Placing radius (M) | 42.9 |
| 3 | Concrete placing depth(M) | 32.7 |
| 4 | Control mode | Electric proportion |
| 5 | Folding type of boom | RZ type |
| 6 | Rotating angle of turret | 360° |
| 7 | Opening mode of landing leg | X-R |
| 8 | Length of end hose (MM) | 3000 |
| 9 | Concrete delivery pipe dia. | 125 |
| III. Electric Control System | ||
| 1 | Working voltage（V）: | 24 |
| IV. Hydraulic transmission system | ||
| 1 | Type of hydraulic system | Open type |
| 2 | Hydraulic fuel tank capacity (l) | 600 |
| 3 | Cooling mode of hydraulic oil | Forced-air Cooling |
| 4 | High-low pressure changeover valve | None |
| VII. Pumping system | ||
| 1 | Form of concrete distribution valve | S Valve |
| 2 | Concrete cylinder | 230 |
| 3 | Maximum feeding height (MM) | 1500 |
| 4 | Hopper capacity (M3 ) | 0.65 |
| 5 | Slump of pumped concrete | 80-220 |
| 6 | Dimension of allowable maximum aggregate (MM) | 40 |
| 7 | Lubricating method | Centralized lubrication |
PHOTOS
inquiry: WE WILL CONTACT YOU WITHIN 24 HOURS
