Description:
Horizontal reach: 28-36m (not Including the end hose), Mode of drive: fully hydraulic;
the climbing type concrete placing boom can be anchored to the floor with Initially prepared holes when working, and it can be lifted itself by its equipped climbing system, one lifting can meet the need of two floors concrete placement.
If the floor area is large, several tower bodies can be installed and move the boom assembly onto relevant tower body to meet the needs of certain area concrete placement and save cost.
Compact structure, easy operation, reliable safety, economical and practical, it can be installed on either floor or lift shaft.
specification:
| Model | HG32 | |
| Delivery pipe dimension(outside diameter×thickness) (mm×mm) | φ133×4.5 | |
| Delivery hose dimension (inside diameter×length) (mm ×mm) | φ125×3000 | |
| Radius of placing boom(m) | 31.7 | |
| Stationary height(to the join between the end of the boom and swivel table(m) | 22.7 | |
| tower body mast section（mm） | 750x750 | |
| Slewing range(°) | 360 | |
| Power of motor(kw) | 15 | |
| Pressure of hydraulic system (MPa) | 31 | |
| Type of hydraulic oil | AW68 | |
| The min.Interval of climbingFrame (m) | Climbing | 3.0 |
| Placing concrete | 6.0 | |
| Resting | ||
| Mode of operation | 1．cable remote control2．radio remote control | |
| power | 380V/50Hz | |
| wind speed | Placing concrete | ≤60 km／h |
| Climbing | ≤28 km／h | |
| working temperature | 0～60℃ | |
PHOTOS
inquiry: WE WILL CONTACT YOU WITHIN 24 HOURS
